Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2011 >> Soul Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 2.0L) >> Idle Speed Control Actuator (ISCA) >> Repair procedures >> Inspection

Repair procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Disconnect ISCA connector.
  3. Measure resistance between ISCA terminals 2 and 1 [Opening Coil].
  4. Measure resistance between ISCA terminals 2 and 3 [Closing Coil].
  5. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About Mike's Workshop Manuals