Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2011 >> Sorento Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Immobilizer System) >> Immobilizer Control Unit >> Repair procedures >> Installation

Repair procedures: Installation

WARNING: This page is about a different car, the 2011 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the immobilizer control unit after connecting the unit connector.
  2. Install the steering column assembly.
    NOTE: Do not reuse the shear bolt.
    When install the new shear bolt to the immobilizer unit, tighten the shear bolt until its head is cut off.
  3. Install the crash pad lower panel.
scientia non olet · About Mike's Workshop Manuals