Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2011 >> Sorento Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Disc Brake System) >> Brake Line >> Repair procedures >> Installation

Repair procedures: Installation

WARNING: This page is about a different car, the 2011 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is the reverse of removal.
    CAUTION: Use a new washer (A) whenever installing.
    Fig 1: Locating Washer
    G06874514Courtesy of HYUNDAI MOTOR CO.
  2. After installation, bleed the brake system. (Refer to BRAKE SYSTEM BLEEDING .)
  3. Check the spilled brake oil.
scientia non olet · About Mike's Workshop Manuals