Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2011 >> Sorento Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transaxle System) >> Manual Transaxle >> Repair procedures >> Installation

Repair procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Installation is the reverse of removal.
  2. After completing the installation perform the following procedure;
  1. Adjust the shift cable.
  2. Refill the all fluids.
  3. Clean the battery posts and cable terminals with sandpaper and grease them to prevent corrosion before installing.
scientia non olet · About Mike's Workshop Manuals