General Information: DTC Detecting Condition
DTC DETECTING CONDITION CHART
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
- Open or short in circuit
- Faulty Shift cable adjustment
- Faulty Inhibitor switch and Manual control lever position adjustment
- Faulty TRANSAXLE RANGE SWITCH
- Faulty TCM (PCM)
|
| Enable Conditions |
- Ne ≥ 500rpm
- Battery voltage ≥ 9V
|
|
| Threshold Value |
|
| Diagnostic Time |
|
| Fail Safe |
- Recognition as previous signal
- When P-D or R-D or D-R SHIFT is detected, it is regarded as N-D or N-R though "N" signal is not detected.
- When sports mode S/W is ON without P, R, N, D-RANGE signals, it is regarded sports mode. (DTC is not set)
|