Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2011 >> Rio Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle System Diagnosis) >> DTC P0717: AT Input speed Sensor Circuit Low Input >> General Information >> DTC Detecting Condition

General Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
DTC DETECTING CONDITION CHART

Item Detecting Condition Possible Cause
DTC Strategy
  • Speed rationality check
  • Faulty INPUT SPEED SENSOR
  • Faulty PCM/TCM
Enable Conditions
  • Battery voltage ≥ 9V
  • Inhibitor switch : "D, 2, L"
  • Output shaft speed ge; 1000rpm
  • Engine speed (only 1st gear) ≥ 3000rpm
 
Threshold Value
  • No signal
Diagnostic Time
  • More than 1sec
Fail Safe
  • Locked into 3rd or 2nd gear.
  • Manual shifting is possible (2nd → 3 rd, 3 rd → 2nd)