Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2010 >> Soul !, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 2) - 2.0L >> DTC P1675: Immobilizer-Transponder Programming Error >> Scantool Diagnostics >> Monitor Scantool Data

Monitor Scantool Data

  1. Check status
    1. Ignition "ON" & Engine "OFF"
    2. Monitor the "ECM, Key and SMARTRA Status" parameters on the scantool.

      Specification:  'LEARNT'

      Fig 1: Monitoring ECM, Key, & SMARTRA Status Parameters On Scantool
      G06520562Courtesy of KIA MOTORS AMERICA, INC.
    3. Are "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS" Parameter within specifications?

      YES 

      • Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage on the ECM or SMARTRA. Also, check that this DTC has not erased in a previous repair. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

      NO 

scientia non olet · About Mike's Workshop Manuals