Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2010 >> Sedona Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Controller >> Manual Controller >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the center air vent.
  3. Remove the heater & A/C controller (A) after loosening 4 screws.
    Fig 1: Identifying Heater & A/C Controller
    G06844047Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Identifying Wire Harness
    G06844048Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the heater & A/C controller (A).
    Fig 3: Identifying Heater & A/C Controller
    G06844049Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse order of removal.