Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2010 >> Sedona Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Motor >> Repair procedures >> Body Electrical System >> Inspection >> Front Power Window Motor Inspection

Front Power Window Motor Inspection

  1. Remove (-) negative battery terminal.
  2. Remove the rear door trim panel. (Refer to the FRONT DOOR )
  3. Disconnect the motor connector from the motor.
    Fig 1: Identifying Front Power Window Motor Connector Terminals
    G06839046Courtesy of KIA MOTORS AMERICA, INC.
  4. Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.
scientia non olet · About Mike's Workshop Manuals