Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2010 >> Sedona Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> BCM (Body Control Module) >> Body Network System >> Description and Operation >> Body Electrical System >> Functions >> Park/Tail Lamps Function

Park/Tail Lamps Function

  1. Necessary conditions to switch ON:
    1. By putting the Head lamp switch in position 'Park and Tail lamp' or 'Head lamp Low Beam' or Auto light activation or DRL activation
  2. Necessary conditions to switch OFF:
    1. If they are released by the Head lamp switch (Auto light function deactivated) and if DRL function is deactivated
    2. If the Auto light function is active but the Auto light Sensor signal status is OFF or Battery Saver function is active.
  3. Functional diagram
    Fig 1: Park/Tail Lamps - Functional Diagram
    G06838791Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals