Body Electrical System: Description: Notes

All modules are linked a low speed CAN network.

The input information for the modules is coming from both the CAN network and the hardware components (actuators and sensors).

• FAM (Front Area Module)
  • Headlamp low/high beam control (with DRL)
  • Park lamp control
  • Front fog lamp control
  • Front turn signal lamp control
  • Windshield wiper control
  • Windshield deicer
  • Diagnostics
• IPM (In-Panel Module)
  • RKE (Remote Keyless Control)
  • VAS (Voice Alarm System)
  • Ignition key hole illumination
  • Switch indicators control
  • Panel light control
  • Seat belt warning
  • Auto light/DRL control (Logic)
  • Windshield/Rear wiper control (Logic)
  • Turn and Hazard lamp control (Logic)
  • Central door lock (Logic)
  • Windshield deicer timer
  • Rear glass defog timer
  • Gateway for ISO-9141 (K-Line)
• RAM (Rear Area Module)
  • Tail lamp control
  • Turn and Hazard lamp control
  • Back up lamp control
  • Rear fog lamp control
  • Stop lamp outage detection
  • Sliding door power window/Quarter glass control
  • Room lamp control
  • Rear wiper control
  • Rear glass defog
  • Fuel filler door open solenoid control
• ADM (Assist Drive Module)
• DDM (Driver Drive Module)