Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2010 >> Rondo EX, 2.7 6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Control System -- 2.4L) >> Injector >> Repair Procedures >> Component Inspection

Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Disconnect injector connector.
  3. Measure resistance between injector terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  Refer to SPECIFICATION  section.

scientia non olet · About Mike's Workshop Manuals