Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2010 >> Rondo EX, 2.7 6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Control System -- 2.4L) >> ETC (Electronic Throttle control) System >> Repair Procedures >> Component Inspection >> ETC system initialization

ETC system initialization

WARNING: This page is about a different variant/trim than selected.

When ignition switch is turned from OFF to ON, ETC system learns the throttle angle in 1 sec.

  1. Throttle valve moves from limp-home position to close position.
  2. And then, it opens to about 15° and moves to limp-home position.
scientia non olet · About Mike's Workshop Manuals