Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2010 >> Forte EX, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle Control System - A5CF2) >> Inhibitor Switch >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery terminal.
  2. Remove the battery and battery tray.
  3. Remove the air duct.
  4. Remove the air cleaner assembly. (Refer to AUTOMATIC TRANSAXLE SYSTEM - A5CF2 )
  5. Disconnect the inhibitor switch connector (A).
    Fig 1: Identifying Inhibitor Switch Connector
    G06494651Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the control cable (A) from the manual control lever.
    Fig 2: Identifying Control Cable
    G06494652Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the inhibitor switch and manual control lever.
scientia non olet · About Mike's Workshop Manuals