Ignition Coil Inspection: Notes
- Ignition "OFF"
- Ignition coil connector: Disconnect
- Visually/physically inspect the following items:
- Damage, cracks and flashover
- Measure the primary coil resistance between terminals 1,3 and 2,3
Specification:
TEMPERATURE SPECIFICATIONTemperature Ignition Coil Resistance (°C) (°F) Primary Coil (Ω) Secondary Coil (kΩ) -20 -4 0.5 7.7 0 32 0.54 8.4 20 68 0.58 9.1 40 104 0.62 9.8 60 140 0.66 10.5 80 176 0.71 11.2 - Is resistance within the specified value?
YES
- Go to "TIMING INSPECTION " procedure
NO
- Replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure