Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2009 >> Sedona Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer Control System >> DTC P1610 Non-Immobilizer Ems Installed >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scantool and selet "Diagnostic Trouble Codes(DTCs)" mode and then clear DTC.
  2. Operate the vehicle and monitor the DTC on the scantool.
  3. Are any DTCs present?

YES 

Go to the applicable troubleshooting procedure.

NO 

System is performing to specification at this time.

scientia non olet · About Mike's Workshop Manuals