Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2009 >> Rio Base, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Blower Controls >> Intake Actuator >> Replacement

Intake Actuator: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the glove box.
  3. Disconnect the intake actuator connector.
  4. Loosen the mounting screw and then remove the intake actuator (A) from the blower unit.
    Fig 1: Removing Intake Actuator From Blower Unit
    G04863915Courtesy of KIA MOTORS AMERICA, INC.
  5. Install in reverse order of removal.
scientia non olet · About Mike's Workshop Manuals