Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2009 >> Borrego Limited, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Control System - 3.8L) >> Accelerator Position Sensor (APS) >> Specifications

Accelerator Position Sensor (APS): Specifications

WARNING: This page is about a different variant/trim than selected.

[Non-Adjust type] 

VOLTAGE SPECIFICATION CHART - NON-ADJUST TYPE

Pedal Position Output Voltage (V) [Vref = 5.0V]
APS1 APS2
Released 0.7 ~ 0.8 0.275 ~ 0.475
Fully depressed 3.8 ~ 4.4 1.75 ~ 2.35
Fig 1: Accelerator Position Sensor Output Voltage Graph - Non-Adjust Type
G06362760Courtesy of KIA MOTORS AMERICA, INC.

[Adjust type] 

VOLTAGE SPECIFICATION CHART - ADJUST TYPE

Accelerator Position Output Voltage (V) [Vref = 5.0V]
APS1 APS2
C.T 0.7 ~ 0.8V 0.29 ~ 0.46V
W.O.T 3.85 ~ 4.35V 1.93 ~ 2.18V
RESISTANCE SPECIFICATION CHART

Item Sensor Resistance (kΩ)
APS1 0.7 ~ 1.3 at 20°C (68°F)
APS2 1.4 ~ 2.6 at 20°C (68°F)
Fig 2: Accelerator Position Sensor Output Voltage Graph - Adjust Type
G06362761Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals