Signal Circuit Inspection

Measure resistance between each terminal of the sensor harness connector and TCM (PCM) harness connector. See RESISTANCE SPECIFICATION CHART .

RESISTANCE SPECIFICATION CHART

Pin No of "TRANSAXLE RANGE SWITCH"	C21 No. 1	C21 No. 3	C21 No. 4	C21 No. 7
Pin No of "PCM" harness	C01-1 No. 6	C01-1 No. 3	C01-1 No. 5	C01-1 No. 4
Specification	0Ω	0Ω	0Ω	0Ω

Fig 1: Measuring Resistance Between Each Terminal Of Sensor And TCM (PCM) Harness Connector

Courtesy of KIA MOTORS AMERICA, INC.

Is resistance within specifications?
YES
- Go to "COMPONENT INSPECTION " procedure.
NO
- Check for Open in harness. Repair as necessary and Go to "VERIFICATION OF VEHICLE REPAIR " procedure.