Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2008 >> Sedona Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Blower And A/C Controls (Automatic)) >> DTC B1237 Ambient Temperature Sensor Short (Low) >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

WARNING: This page is about a different variant/trim than selected.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode and then clear DTC.
  2. Operate the vehicle and monitor the DTC on the scan tool.
  3. Are any DTCs present?

    YES 

    Go to the applicable troubleshooting procedure. 

    NO 

    System is performing to specification at this time.