Starter Test Results
STARTER TEST RESULTS
| RESULT ON PRINTER | REMEDY |
|---|---|
| Cranking voltage normal | System shows a normal starter draw |
| Cranking voltage low | Cranking voltage is lower than normal level |
| => Check starter | |
| Charge battery | The state of battery charge is too low to test |
| => Charge the battery and retest | |
| Replace battery | => Replace battery |
| => If the vehicle is not started though the battery condition of "Good and fully charged" is displayed. | |
| => Check wiring for open circuit, battery cable connection, starter and repair or replace as necessary. |