Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2008 >> Rio Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (SRS Control System) >> Seat Track Position Sensor >> Removal

Seat Track Position Sensor: Removal

WARNING: This page is about a different car, the 2008 Kia Optima and 2008 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable, and wait for at least 3 minutes before beginning work.
  2. Remove the front seat assembly. Refer to SEAT .
  3. Disconnect the STPS connector and loosen the two STPS screws.
    Fig 1: Identifying STPS Connector
    G04805712Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals