Manual Transaxle Shift Control System: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the shift boot (A).

Fig 1: Identifying Shift Boot
Courtesy of KIA MOTORS AMERICA, INC.
Remove the center console (A). See Fig 2.

Fig 2: Center Console Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Remove the snap pin (B) and the clip (A) from the select cable assembly.

Fig 3: Identifying Snap Pin And Clip
Courtesy of KIA MOTORS AMERICA, INC.
Remove the clip (A) from the shift cable assembly.

Fig 4: Identifying Clip From Shift Cable Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Remove the shift lever assembly (A).

Fig 5: Identifying Shift Lever Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Remove the retainer (A) and nuts (B).

Fig 6: Identifying Retainer And Nuts
Courtesy of KIA MOTORS AMERICA, INC.
Remove the select and shift cable assembly (A) from the transaxle. Refer to TRANSAXLE REMOVAL .

Fig 7: Identifying Shift Cable Assembly
Courtesy of KIA MOTORS AMERICA, INC.