Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2008 >> Magentis 2.4 3 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Control System - Fuel System (G6EA-GSL 2.7L)) >> Etc (Electronic Throttle Control) System >> Inspection >> Component Inspection >> Etc System Initialization

Etc System Initialization

WARNING: This page is about a different variant/trim than selected.
  1. Erase DTC(s) memorized in PCM with a scan tool.
  2. Turn ignition switch off and wait for about 10 seconds.
  3. Turn ignition switch on for more then 1 second. (At this time, the PCM records initial position of ETC motor on its EEPROM).
scientia non olet · About Mike's Workshop Manuals