Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2007 >> Sorento EX, 4WD, Part Time, A5SR1 >> Repair and Diagnosis >> Transmission >> Automatic Transaxle System >> Automatic Transaxle System >> DTC P0716 Input Speed Sensor Range/Performance >> Ground Circuit Inspection

Ground Circuit Inspection

  1. Remove "OIL PAN".
  2. Engine "OFF".
  3. Disconnect the "C106-3 and Shift CM" connector.
  4. Measure resistance between terminal "3" of the INPUT SPEED SENSOR harness connector and chassis ground.

    Specification : approx. 0Ω

    Fig 1: Measuring Resistance Between Terminal No. 3 Of Input Speed Sensor Harness Connector And Chassis Ground
    G05119223Courtesy of KIA MOTORS AMERICA, INC.
  5. Is resistance within specifications?

    YES 

    NO 

scientia non olet · About Mike's Workshop Manuals