Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2007 >> Sorento Base, A5SR2 >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) >> Troubleshooting For DTC >> DTC P0463 Fuel Level Sensor "A" Circuit High Input >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Check Voltage
    1. IG "OFF" and disconnect Fuel level sensor connector and ECM connector.
    2. IG "ON" & ENG "OFF"
    3. Measure voltage between terminal 29 of ECM harness connector (C144-A) and chassis ground.

      Specification: Approx. 0V

    4. Is the measured voltage within specification?

      YES 

      NO 

scientia non olet · About Mike's Workshop Manuals