Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (F4A42) >> Automatic Transaxle System >> DTC P0708 Transaxle Range Switch - High Input >> Power Supply Circuit Inspection

Power Supply Circuit Inspection

  1. Disconnect "TRANSAXLE RANGE SWITCH" connector.
  2. Ignition "ON" & Engine "OFF".
  3. Measure voltage between each terminal of the sensor harness connector and chassis ground.

    Specification :

    PIN SPECIFICATION

    TERMINAL No.1 No.3 No.4 No.7 No.8 No.9 No.10
    SPECIFICATION 0V 0V 0V 0V 12V 0V 0V
    Fig 1: Measuring Voltage Between Terminal Of Sensor Harness Connector And Chassis Ground
    G05186340Courtesy of KIA MOTORS AMERICA, INC.
  4. Is voltage within specifications?

    YES 

    NO 

scientia non olet · About Mike's Workshop Manuals