Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Automatic Transaxle System (A5GF1)) >> Automatic Transaxle System >> DTC P0732 Gear 2 Incorrect Ratio >> Monitor SCANTOOL Data

Monitor SCANTOOL Data

WARNING: This page is about a different variant/trim than selected.
  1. Connect scan tool to data link connector (DLC).
  2. Engine "ON".
  3. Monitor the "ENGINE SPEED, INPUT SPEED SENSOR, OUTPUT SPEED SENSOR, GEAR POSITION" parameter on the scan tool.
  4. Perform the "STALL TEST" with gear position "2".

    Specification : 2100~2800 engine RPM

    Fig 1: Monitor Scantool Data - ENGINE SPEED, INPUT SPEED SENSOR, OUTPUT SPEED SENSOR, GEAR POSITION Parameter
    G05186597Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals