Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Automatic Transaxle Control System (A5GF1)) >> Solenoid Valve >> Removal

Solenoid Valve: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery terminal.
  2. Lift the vehicle.
  3. Remove the splash shield.
  4. Loosen the drain plug and drain the transaxle oil.
  5. Remove the oil pan. (Refer to AUTOMATIC TRANSAXLE )
  6. Disconnect the solenoid valve connectors.
  7. Remove the solenoid valve (B-6EA) by removing the supporting bracket (A).
    Fig 1: Removing/Installing Solenoid Valves
    G05116838Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals