Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) - 2.4L >> DTC P0630 VIN Not Programmed Or Incompatible - ECM/Pcm >> System Inspection

System Inspection

  1. Was the ECM just replaced or reflashed?

    YES 

    • Using a scan tool, perform "VIN WRITING " procedure. Refer to the latest Reference manual for scan tool and go to "VERIFICATION OF VEHICLE REPAIR " procedure

    NO 

    • Using a scan tool, read VIN information.

      If there is no proper VIN information, perform "VIN WRITING " procedure.

      If VIN information exists, substitute with a known-good ECM and check for proper operation. If the problem is corrected, replace ECM.

      And go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About Mike's Workshop Manuals