Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) - 2.4L >> DTC P0600 Can Communication Bus >> Check Can Communication Line For Short To Battery

Check Can Communication Line For Short To Battery

  1. Disconnect the connectors related to the CAN communication
  2. Ignition "ON" & Engine "OFF"
  3. Measure voltage between terminal 76 of the ECM harness connector and chassis ground.
  4. Measure voltage between terminal 78 of the ECM harness connector and chassis ground.

    Specification : Approx. 0V

    Fig 1: Measuring Voltage Between Terminal 78 Of ECM Connector And Chassis Ground
    G05182178
  5. Is voltage within the specification?

    YES 

    NO 

scientia non olet · About Mike's Workshop Manuals