Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) - 2.4L >> DTC P0448 EVAP. Emission System-Vent Control Circuit Shorted >> Component Inspection

Component Inspection

  1. Ignition "OFF"
  2. Disconnect CCV connector
  3. Measure resistance between terminals 1 and 2 of the CCV connector (Component side)

    Specification : Approx. 23~26Ω at 20°C (68°F)

    Fig 1: Measuring Resistance Between Terminals 1 And 2 Of CCV Connector (Component Side)
    G05182136
  4. Is resistance within the specification?

    YES 

    NO 

    • Check CCV for contamination, deterioration, or damage. Substitute with a known-good CCV and check for proper operation. If the problem is corrected, replace CCV and then go to "VERIFICATION OF VEHICLE REPAIR " procedure
scientia non olet · About Mike's Workshop Manuals