Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2007 >> Rio Base, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> On-Vehicle Service - M/T >> Service Adjustment Procedure >> Backup Lamp Switch >> Inspection

Backup Lamp Switch: Inspection

  1. Disconnect the backup lamp switch (A).
    Fig 1: Identifying Backup Lamp Switch
    G04862438Courtesy of KIA MOTORS AMERICA, INC.
  2. Check the continuity between no. 1 and 2 terminals of backup lamp switch.

    When the shift lever is in reverse, there should be continuity.

    Fig 2: Checking Continuity Between Terminals Of Backup Lamp Switch
    G04862439Courtesy of KIA MOTORS AMERICA, INC.
  3. If necessary, repair or replace the backup lamp switch.