Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2007 >> Rio Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (SRS Control System) >> Side Impact Sensor (Sis) >> Removal >> Rear Side Impact Sensor

Rear Side Impact Sensor

WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the rear pillar trim. (Refer to INTERIOR TRIM )
  3. Disconnect the Side Impact Sensor connector.
  4. Remove the SIS mounting bolt then remove the Side Impact Sensor.
    Fig 1: Locating Rear Side Impact Sensor
    G04883723Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals