Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2007 >> Rio Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Steering System - General) >> Service Adjustment Procedure >> Checking Steering Angle

Checking Steering Angle

WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the front wheel on a turning radius gauge and measure the steering angle.

    STEERING ANGLE 

    STEERING ANGLE SPECIFICATION

    Inner 38.64 °
    Outer 31.78 °
  2. If the measured value is not within the standard value, adjust the toe and inspect again.
    Fig 1: Placing Front Wheel On Turning Radius Gauge
    G04805532Courtesy of KIA MOTORS AMERICA, INC.