Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2007 >> Rio Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) >> DTC P0650 Malfunction Indicator Lamp (Mil) Control Circuit >> Control Circuit Inspection

Control Circuit Inspection

  1. Key "OFF".
  2. Disconnect ECM/PCM connector.
  3. Key "ON".
  4. Measure the voltage between terminal 51/C01-2 of ECM/PCM harness connector and chassis ground. [A/T]

    Measure the voltage between terminal 70/C01 of ECM/PCM harness connector and chassis ground. [M/T]

    Specification: B+

  5. Is the measured voltage within specification?

    YES 

    NO 

scientia non olet · About Mike's Workshop Manuals