Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2007 >> Magentis 2.4 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Lighting) >> Turn Signal Flasher Assembly >> Installation

Turn Signal Flasher Assembly: Installation

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL TURN SIGNAL FLASHER ASSEMBLY 
    1. Install the turn signal flasher assembly with the clamp.
    2. Connect the connector.
  2. INSTALL COMBINATION METER ASSEMBLY (See Step 2 in  INSTALLATION  ) 
  3. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY (See  INSTALLATION  ) 
  4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (See Step 22 in  INSTALLATION  ) 
  5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See Step 24 in  INSTALLATION  ) 
  6. INSTALL SIDE INSTRUMENT PANEL LH (See Step 26 in  INSTALLATION  ) 
  7. INSTALL FRONT DOOR OPENING TRIM COVER LH (See Step 27 in  INSTALLATION  ) 
  8. INSTALL FRONT DOOR SCUFF PLATE LH (w/o Illumination) (See Step 88 in  INSTALLATION  ) 
  9. INSTALL FRONT DOOR SCUFF PLATE LH (w/ Illumination) (See Step 90 in  INSTALLATION  ) 
  10. INSTALL STEERING COLUMN COVER (for Power Tilt and Power Telescopic) (See Step 8 in  INSTALLATION  ) 
  11. INSTALL STEERING COLUMN COVER (for Manual Tilt and Telescopic) (See Step 7 in  INSTALLATION  ) 
scientia non olet · About Mike's Workshop Manuals