Component Inspection

Measure resistance between terminals 1 and 2 of the solenoid connector (Component side).

OCV RESISTANCE

Temperature		OCV Resistance (Ω)	Temperature		OCV Resistance (Ω)
(°C)	(°F)	OCV Resistance (Ω)	(°C)	(°F)	OCV Resistance (Ω)
0	32	6.2~7.4	60	140	8.0~9.2
20	68	6.8~8.0	80	176	8.6~9.8
40	104	7.4~8.6

Fig 1: Measuring Resistance Between Terminals 1 And 2 Of Solenoid Connector

Courtesy of KIA MOTORS AMERICA, INC.

Is resistance within specification?
YES
- Go to CONTROL CIRCUIT INSPECTION procedure.
NO
- Check intake valve control solenoid for contamination, deterioration, or damage. Substitute with a known-good solenoid and check for proper operation. If the problem is corrected, replace solenoid and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.