Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2005 >> Spectra5 2.0 2, Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Diagnosis & Overhaul >> Automatic Transaxle System >> Basic Inspection Adjustment >> A/T Control Component Check >> A/T Control Relay Check

A/T Control Relay Check

  1. Remove the A/T control relay.
  2. Use jumper wires to connect A/T control relay terminal 2 to the battery (+) terminal and terminal 4 to the battery (-) terminal.
  3. Check the continuity between terminal (1) and terminal (3) of the A/T control relay when the jumper wires are connected to and disconnected from the battery.
  4. If there is a problem, replace the A/T control relay.
    Fig 1: A/T Control Relay Continuity
    G00331978Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: A/T Control Relay Meter Connections
    G00331979Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals