Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2005 >> Sorento EX, 4WD, Part Time >> Repair and Diagnosis (Single Page) >> Body & Frame >> Body, Cab Control Systems >> Electronic Time & Alarm Control System (ETACS) >> Electronic Time & Alarm Control Module >> Removal And Installation

Removal And Installation

  1. Disconnect the negative (-) battery terminal.
  2. Remove the audio unit. See AUDIO SYSTEM article.
  3. Remove the 2 nuts holding the ETACS module and disconnect the connectors.
    Fig 1: Disconnecting ETACS Module & Connectors
    G02201757Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
scientia non olet · About Mike's Workshop Manuals