Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2005 >> Rio Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Fuel System & Fault Isolation) >> DTC Troubleshooting >> DTC P1586: At/Mt Encoding Error >> Inspection/Repair >> W/Harness Inspection >> Terminal and Connector Inspection

Terminal and Connector Inspection

WARNING: This page is about a different car, the 2004 Kia Rio. However, it is still accessible from the selected car via links, so may be relevant.
  1. Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Has a problem been found?

    YES

    1. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO

    1. Go to "SIGNAL CIRCUIT INSPECTION " procedure.
scientia non olet · About Mike's Workshop Manuals