Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2004 >> Sorento EX, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> Specifications >> Fuel System & Fault Isolation >> DTC Troubleshooting Procedures >> DTC P0446: EVAP Emission System - Vent Control Circuit >> Component Inspection

Component Inspection

Check PCSV 

  1. IG KEY: OFF, Engine: OFF
  2. Measure resistance between terminal 1 and 2 of the CCV connector.
    1. Specification: Approx. 23~26Ω (20°C)
      Fig 1: Measuring Resistance Between Terminal 1 And 2 Of CCV Connector
      G07703302
  3. Check that the ground voltage is less than approx. 0.3V (1) and the surge voltage (2) is between 40V and 60V in the PCSV's signal waveform.
    Fig 2: Scan Tool Screen Display - Purge Control Solenoid Valve Signal Waveform
    G07703303
  4. Is the CCV normal?

    YES

    1. Go to "SYSTEM INSPECTION " procedure.

    NO

    1. Repair or replace it. Then go to "VERIFICATION OF VEHICLE REPAIR " procedure.