Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2004 >> Sorento EX, 4WD, Part Time >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> 3.5L Engine >> Cylinder Block >> Piston And Connecting Rod >> Repair Procedures >> Disassembly >> Connecting Rod Cap

Connecting Rod Cap

CAUTION: Keep the bearings in order with their corresponding connecting rods (according to cylinder numbers) for proper reassembly.
  1. Remove the connecting rod cap bolts, then remove the caps and the big end lower bearing mark for reassembly.
  2. Push each piston connecting rod assembly toward the top of the cylinder.
    Fig 1: Connecting Rod Cap
    G00556670Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals