ETACS Function

Rear intermittent wiper.

Fig 1: Identifying Rear Intermittent Wiper Operation & Timing Specification
Courtesy of KIA MOTORS AMERICA, INC.

Time specification

T: 5 +/- 1 sec.

T1: 0.5 +/- 0.25 sec.
Rear washer related wiper.

Fig 2: Identifying Rear Washer/Wiper Operation & Timing Specification
Courtesy of KIA MOTORS AMERICA, INC.

Time specification

T: 0.5 +/- 0.25
Rear window defogger and front windshield defogger.

Fig 3: Identifying Defogger Operation & Timing Specification
Courtesy of KIA MOTORS AMERICA, INC.

Time specification

T1: 15 +/- 3 min.
Seat belt warning

Fig 4: Identifying Seat Belt Warning Operation & Timing Specification
Courtesy of KIA MOTORS AMERICA, INC.

Time specification

T1: 6 +/- 1.5 sec.

T2: 0.5 +/- 0.1 sec.
Ignition key hole illumination

Fig 5: Identifying Ignition Key Hole Illumination Operation & Timing Specification
Courtesy of KIA MOTORS AMERICA, INC.

Time specification

T: 30 +/- 10
Delayed out room lamp

Fig 6: Identifying Delayed Out Room Lamp Operation & Timing Specification
Courtesy of KIA MOTORS AMERICA, INC.

Time specification

T1: 4.5 +/- 1.0 sec.

T2 ; 10 +/- 2.0 sec.

T3: 20 +/- 2 min.
1. Upon the front door or sliding door open with keyless switch OFF, the room lamp and courtesy lamp turns on for T3.
2. Upon the door switch OFF with ACC is OFF, the room lamp declines 100% to 0% for T1.
3. Upon the door switch OFF with ACC is ON, the room lamp turns on for T1.
4. The room lamp turns on for T1 when the door unlock signal is ON by RKE.
Ignition key reminder

Fig 7: Identifying Ignition Key Reminder Operation
Courtesy of KIA MOTORS AMERICA, INC.
Battery saver.

Fig 8: Identifying Battery Saver Operation
Courtesy of KIA MOTORS AMERICA, INC.
Power window timer

Fig 9: Identifying Power Window Timer Operation & Timing Specification
Courtesy of KIA MOTORS AMERICA, INC.

Time specification

T1: 30 +/- 6 sec.
Sliding door lock

Fig 10: Identifying Sliding Door Lock Operation & Timing Specification
Courtesy of KIA MOTORS AMERICA, INC.

Time specification

T1: 0.5 +/- 0.1 sec.
2-Turn unlock

Fig 11: Identifying 2-Turn Unlock Operation & Timing Specification
Courtesy of KIA MOTORS AMERICA, INC.

Fig 12: Identifying RKE Operation & Timing Specification
Courtesy of KIA MOTORS AMERICA, INC.

Time specification

T1: 3+/-0.5 sec.

T2: 0.5 sec.
Door ajar

Fig 13: Identifying Door Ajar Operation
Courtesy of KIA MOTORS AMERICA, INC.
Parking on drive

Fig 14: Identifying Parking On Drive Operation & Time Specification
Courtesy of KIA MOTORS AMERICA, INC.

Time specification

T1: 0.5+/-0.1 sec.
Central door lock/unlock.

Fig 15: Identifying Central Door Lock/Unlock Operation
Courtesy of KIA MOTORS AMERICA, INC.
Light warning

Fig 16: Identifying Light Warning Operation
Courtesy of KIA MOTORS AMERICA, INC.
Remove keyless Entry system.
1. Door lock
  
  Fig 17: Identifying RKE Door Lock Operation
  Courtesy of KIA MOTORS AMERICA, INC.
2. Door unlock
  
  Fig 18: Identifying RKE Door Unlock Operation & Timing Specification
  Courtesy of KIA MOTORS AMERICA, INC.
  
  Time specification
  
  T1: 1.0+/-2.0 sec.
3. Panic
  
  Fig 19: Identifying Panic Operation & Timing Specification
  Courtesy of KIA MOTORS AMERICA, INC.
  
  Time specification
  
  T1: 27+/-2 sec.
  
  T2: 0.5+/-0.1 sec.
Code saving method
1. Connect the coding connector to the Diagnosis connector in order to jump, between terminal 12 and terminal 16 if you have a coding connector, use a jumper wire between the above-mentioned terminals.
2. Turn the ignition switch to "ON" position.
3. Press LOCK button of transmitter two times. If success, the buzzer will operate for approximately one second.
4. Turn the ignition switch to "OFF" position and remove ignition key from key set.
5. Disconnect the coding connector from the diagnosis connect.
6. Check for LOCK and UNLOCK operation.
Fig 20: Connecting Coding Connector
Courtesy of KIA MOTORS AMERICA, INC.