Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2003 >> Magentis LX, 2.4 6, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Overhaul >> Components >> Input Shaft >> Inspection >> Synchronizer Sleeve And Hub

Synchronizer Sleeve And Hub

  1. Install the synchronizer sleeve on the hub and check that it slides smoothly.
    Fig 1: Inspecting Synchronizer Sleeve And Hub
    G01094674Courtesy of KIA MOTORS AMERICA, INC.
  2. Check that the sleeve is free from damage.
  3. Check for wear of the hub end surfaces (in contact with each gear).
CAUTION: Replace the synchronizer hub and sleeve as a set.
scientia non olet · About Mike's Workshop Manuals