Brake System Control Module 2 (BSCM 2) - DTCS C2103-00 To U0151-00

• DTC Troubleshooting
  • C2103-00 System Voltage High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2129-00 Battery Voltage
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2200-00 Anti-Lock Brake Module Internal
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2202-00 Original VIN Mismatch/Missing
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2206-00 Vehicle Configuration Mismatch
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2210-00 Ecu OVERTEMPERATURE
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C221F-00 Ecu Not Initialized
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0602-00 Control Module Programming Error/Not Programmed
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0604-00 Internal Control Module Random Access Memory (Ram) Error
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P060B-00 Internal Control Module A/D Processing Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P062F-00 Internal Control Module EEPROM Error
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2534-00 Ignition Switch On/Start Position Circuit Low
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2535-00 Ignition Switch On/Start Position Circuit High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • U0100-00 Engine Control Module -ECM-Pcm- Can Signal - Missing Message
  • U0101-00 Lost Communication With TCM
  • U0102-00 Lost Communication With Transfer Case Control Module / AWD
  • U0129-00 Lost Communication With Brake System Control Module
  • U0140-00 Lost Communication With Body Control Module
  • U0151-00 Lost Communication With Restraints Control Module