Section 15 (Hybrid Control Processor Module (HCP) - DTCS P0603-00 To P0652-00)

• DTC Troubleshooting
  • P0603-00-Internal Control Module Keep Alive Memory (KAM) Error
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0604-00-Internal Control Module Random Access Memory (Ram) Error
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0605-00-Internal Control Module ROM
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0606-00-Internal Control Processor
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P060C-00-Internal Control Module Main Processor Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P061B-00-Internal Control Module Torque Calculation Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P062F-00-Internal Control Module EEPROM Error
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0642-00-Sensor Reference Voltage 1 Circuit Low
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0643-00-Sensor Reference Voltage 1 Circuit High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0652-00-Sensor Reference Voltage 2 Circuit Low
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test