Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2024 >> Gladiator Nighthawk, Part Time T/Case Control, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Bumpers >> Technical Specifications >> Torque Specifications >> Torque Specifications - Bumpers

Torque Specifications - Bumpers

Description SPECIFICATIONS Comment
Front Bumper Support Bracket Nuts 20 N.m (15 Ft. Lbs.)  -
Front Bumper to Frame Nuts 90 N.m (66 Ft. Lbs.)  -
Rear Bumper Guard to Bracket Bolts 48 N.m (35 Ft. Lbs.)  Do not reuse these fasteners. If removed, a NEW  fastener must be installed and tightened to specifications.
Rear Bumper Guard to Bumper Bolts 48 N.m (35 Ft. Lbs.)  Do not reuse these fasteners. If removed, a NEW  fastener must be installed and tightened to specifications.
Rear Bumper to Hitch Bolts - Bottom 30 N.m (22 Ft. Lbs.)  -
Rear Bumper to Hitch Bolts - Center 30 N.m (22 Ft. Lbs.)  -
Rear Bumper to Hitch Nuts 30 N.m (22 Ft. Lbs.)  -