Mike's Workshop Manuals: Service manuals for every vehicle

Home >> Jeep >> 2023 >> Cherokee Trailhawk >> Repair and Diagnosis >> Engine Performance >> System >> 2.0L - DTCS P0304 To P042E >> DTC Troubleshooting >> P0330-Knock Sensor 2 Circuit >> Set Condition

Set Condition

The Powertrain Control Module (PCM) detects that the Knock Sensor 2 input voltage is either:
- Above 4.8 volts.
- Less than 0.2 volts when engine speed is above 2000 rpm.

scientia non olet · About Mike's Workshop Manuals