Standard Procedure - Hoisting (1.5L MHEV)
If the vehicle is to be lifted, go to a Jeep Dealership which is equipped with the arm lift or workshop lift.
The points for lifting of the car using the jack, (where provided) present in the on-board equipment, are marked on the side skirts by the symbols shown in the figure.
NOTE:
Be careful to select the lift pads of the correct size to fit to the underbody of the car. Also, be sure to correctly place the pads at the openings dedicated, obtained in the underbody aerodynamic guards. These openings are not necessarily aligned with the triangles on the side skirts, which are specifically related to the recommended position for the lifting jack, provided (where present) to the user.